Hanisch J., Schultz L., Huhne R., Usoskin A., Pahlke P., Sieger M., Stromer J., Chekhonin P., Skrotzki W.
Ключевые слова: HTS, YBCO, films, PLD process, RABITS process, substrate Ni-W, IBAD process, stainless steel, buffer layers, microstructure, measurement technique
Usoskin A., Schneider T., Rutt A., Dietrich R., Kirchhoff L., Hofacker F., Hessler A., Svistunova O., Kruglov V.
Tixador P., Volpini G., Bottura L., Usoskin A., Yang Y., Goldacker W., Rossi L., Senatore C., Bajko M., Rijk G., Fazilleau P., Fleiter J., Stenvall A., Ballarino A., Lorin C., Kario A., Dhalle M.M., Badel A., Salmi T., Kirby G., Durante M., Zangenberg N., Haro E., Nugteren J.
Gomory F., Usoskin A., Abrahamsen A.B., Grivel J., Solovyov M., Hansen J.B., Wulff A.C., Mishin O.V., RuttA., Lundeman J.H., Thyden K.
Eisterer M., Holzapfel B., Schultz L., Huhne R., Usoskin A., Pahlke P., Lao M., Hering M., Siegert M., Stromer J.
Ключевые слова: HTS, YBCO, coated conductors, IBAD process, template layers, critical caracteristics, PLD process, microstructure, X-ray diffraction, lattice parameter, thickness dependence, texture, critical temperature, critical current density, substrate stainless steel, fabrication, experimental results
Hanisch J., Schultz L., Huhne R., Usoskin A., Pahlke P., Sieger M., Stromer J., Chekhonin P., Skrotzki W.
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni-W, IBAD process, RABITS process, comparison, PLD process, microstructure, local distribution, texture
Bottura L., Usoskin A., Selvamanickam V., Polyanskii A., Rossi L., Senatore C., Rutt A., Dietrich R., Ballarino A., Schlenga K., Jaroszynski J., Abraimov D., Viouchkov Y.L., Barth C., Santos M., McCallister J., Francis A., Majkic G.S.
Ключевые слова: HTS, YBCO, coated conductors, composition, local distribution, defects, pinning centers, doping effect, lattice parameter, substrate Ni-Cr, IBAD process, PLD process, microstructure, fabrication, critical caracteristics, critical current density, critical current, angular dependence, magnetic field dependence, experimental results
Bottura L., Usoskin A., Larbalestier D., Senatore C., Rutt A., Dietrich R., Kirchhoff L., Schlenga K., Selvamanikam V., Abraimov D.
Ключевые слова: deposition setup, presentation, HTS, YBCO, coated conductors, long conductors, PLD process, buffer layers, texture, fabrication, critical caracteristics, critical current, uniformity, fluctuations, magnetic field dependence, temperature dependence, microstructure, percolation characteristics, width, length
Ключевые слова: HTS, YBCO, coated conductors, power equipment, FCL inductive, prototype, ac losses, shielding effects, experimental results, nitrogen gas, quench current
Ключевые слова: power equipment, FCL inductive, core iron, HTS, coated conductors, nitrogen liquid , impedance, modeling computational, loads, resistance, flux density, quench, current limiting characteristics, loop
Usoskin A., Werfel F.N., Floegel-Delor U., Riedel T., Rothfeld R., Wippich D., Rutt A., Schirrmeister P., Koenig R.
Glowacki B.A., Granados X., Puig T., Obradors X., Usoskin A., Hopkins S.C., Ricart S., Falter M., Backer M., Vlad V.R., Vilardell M., Calleja A., Joseph D., Mitchell-Williams T.B.
Ключевые слова: HTS, YBCO, coated conductors, tapes multifilamentary, inkjet printing, fabrication, ac losses
Ключевые слова: HTS, YBCO, coated conductors multifilamentary, filament arrangements, fabrication, ac losses, experimental results
Usoskin A., Werfel F.N., Floegel-Delor U., Riedel T., Rothfeld R., Wippich D., Goebel B., Rutt A., Schirrmeister P.
Granados X., Puig T., Palau A., Obradors X., Usoskin A., Bartolome E., Vlad V.R., Guzman R., Arbiol J., Calleja A., Aklalouch M.
Usoskin A., Werfel F.N., Floegel-Delor U., Riedel T., Rothfeld R., Wippich D., Goebel B., Rutt A., Schirrmeister P.
Ключевые слова: HTS, coated conductors, stabilizing layers, double-side structures, reel-to-reel process, joints, IBAD process, PLD process, fabrication
Kvitkovic J., Usoskin A., Rutt A., Steurer M., Pamidi S., Schlenga K., Withnell T., Graber L., Chiocchio T.
Ключевые слова: FCL inductive, shields, HTS, YBCO, coated conductors, critical caracteristics, current-voltage characteristics, impedance, quench, joints, mechanical properties, recovery characteristics, IBAD process, PLD process, fabrication, deposition setup, critical current, magnetic field dependence, homogeneity, economic analysis, presentation
Ключевые слова: HTS, FCL inductive, shields, design, design parameters, current limiting characteristics, current distribution, cryogenic systems, presentation
Usoskin A., Werfel F.N., Floegel-Delor U., Riedel T., Rothfeld R., Wippich D., Goebel B., Rutt A., Schirrmeister P.
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.